Yes, I know what sissies love- and what they want. And you know I know- gle." If you don't believe me, just listen to what I have to say- you horny little sluts you!!!
LISTEN BELOW:
http://eroticaudios.com/content/Celeste ... IFTEEN.mp3
Empress Celeste
Read My Blog:
http:///adultphonesexchat.com
1-800-356-6169
empressceleste@yahoo.com
[/b]
Ohhhhh, I KNOW WHAT SISSIES LOVE!!
Moderators: ldwadmin, Ms Ally, Miss Molly
- Jamie Michelle
- Posts: 7210
- Joined: Wed Aug 25, 2004 7:28 pm
- Location: Central Florida
- Contact:
Hi, Empress Celeste.Empress Celeste wrote:Yes, I know what sissies love- and what they want. And you know I know- gle." If you don't believe me, just listen to what I have to say- you horny little sluts you!!!
LISTEN BELOW:
http://eroticaudios.com/content/Celeste ... IFTEEN.mp3
Empress Celeste
Read My Blog:
http:///adultphonesexchat.com
1-800-356-6169
empressceleste@yahoo.com
[/b]
I do so adore big, juicy cocks!
But to here offer you some helpful advice, the audio-quality of you present recording could greatly benefit from the advice I offer in my below post:
"Re: Mistress Courtney Asks, What Does It Mean To YOU To Be A Sis," Jamie Michelle, August 6, 2008 http://getgirlie.com/sissyforum/viewtopic.php?t=8807
To restate the pertinent portion of the above link:
As a tip so that one won't get that low-frequency noise due to gusts of air via vocalization (such as "popping Ps," i.e., plosives): attach some sort of batting material on the front of the microphone. If the microphone is one of the small computer ones, a cotton ball should be big enough to fit over the front (one can even shape the cotton ball, so that it fits down a little ways on the front of the microphone's shaft).
To make it look nicer, you can then wrap that with some highly breathable, light frabric and tie it off; then cut off any excess material.
What doing this will achieve is to prevent the gush of wind (due to vocalization) from hitting the microphone's diaphragm, and hence preventing it from bottoming out. Yet the airy batting material (such as cotton batting) will still allow the sound waves to get through just fine.
Experiment around with different configurations to find out what works best on your microphone.
Boys will be girls.
Author (under a nom de plume) of "Jesus Is an Anarchist", Dec. 4, 2011, http://ssrn.com/abstract=1337761
Theophysics, http://theophysics.freevar.com , http://theophysics.epizy.com
Author (under a nom de plume) of "Jesus Is an Anarchist", Dec. 4, 2011, http://ssrn.com/abstract=1337761
Theophysics, http://theophysics.freevar.com , http://theophysics.epizy.com
-
- Posts: 223
- Joined: Wed Jul 02, 2008 12:56 am
- Contact:
Jamie MichelleJamie Michelle wrote:Hi, Empress Celeste.Empress Celeste wrote:Yes, I know what sissies love- and what they want. And you know I know- gle." If you don't believe me, just listen to what I have to say- you horny little sluts you!!!
LISTEN BELOW:
http://eroticaudios.com/content/Celeste ... IFTEEN.mp3
Empress Celeste
Read My Blog:
http:///adultphonesexchat.com
1-800-356-6169
empressceleste@yahoo.com
[/b]
I do so adore big, juicy cocks!
But to here offer you some helpful advice, the audio-quality of you present recording could greatly benefit from the advice I offer in my below post:
"Re: Mistress Courtney Asks, What Does It Mean To YOU To Be A Sis," Jamie Michelle, August 6, 2008 http://getgirlie.com/sissyforum/viewtopic.php?t=8807
To restate the pertinent portion of the above link:
As a tip so that one won't get that low-frequency noise due to gusts of air via vocalization (such as "popping Ps," i.e., plosives): attach some sort of batting material on the front of the microphone. If the microphone is one of the small computer ones, a cotton ball should be big enough to fit over the front (one can even shape the cotton ball, so that it fits down a little ways on the front of the microphone's shaft).
To make it look nicer, you can then wrap that with some highly breathable, light frabric and tie it off; then cut off any excess material.
What doing this will achieve is to prevent the gush of wind (due to vocalization) from hitting the microphone's diaphragm, and hence preventing it from bottoming out. Yet the airy batting material (such as cotton batting) will still allow the sound waves to get through just fine.
Experiment around with different configurations to find out what works best on your microphone.
I have that same problem with my mic (popping P's and clicks on occasion).
I've been placing the mic away from my mouth at some distance, but that takes away from the volume and make me sound a bit "faded". I intend to use your cotton ball method and test it with some new recordings.
Great tips -- thank you! I need them!
Email Me: EmpressSamantha@yahoo.com
Call Me: 800-356-6169
My Blog: http://www.phonesexfetishblog.com/
Call Me: 800-356-6169
My Blog: http://www.phonesexfetishblog.com/
- Jamie Michelle
- Posts: 7210
- Joined: Wed Aug 25, 2004 7:28 pm
- Location: Central Florida
- Contact:
You're very welcome, Empress Samantha.EmpressSamantha wrote:Jamie MichelleJamie Michelle wrote:Hi, Empress Celeste.Empress Celeste wrote:Yes, I know what sissies love- and what they want. And you know I know- gle." If you don't believe me, just listen to what I have to say- you horny little sluts you!!!
LISTEN BELOW:
http://eroticaudios.com/content/Celeste ... IFTEEN.mp3
Empress Celeste
Read My Blog:
http:///adultphonesexchat.com
1-800-356-6169
empressceleste@yahoo.com
[/b]
I do so adore big, juicy cocks!
But to here offer you some helpful advice, the audio-quality of you present recording could greatly benefit from the advice I offer in my below post:
"Re: Mistress Courtney Asks, What Does It Mean To YOU To Be A Sis," Jamie Michelle, August 6, 2008 http://getgirlie.com/sissyforum/viewtopic.php?t=8807
To restate the pertinent portion of the above link:
As a tip so that one won't get that low-frequency noise due to gusts of air via vocalization (such as "popping Ps," i.e., plosives): attach some sort of batting material on the front of the microphone. If the microphone is one of the small computer ones, a cotton ball should be big enough to fit over the front (one can even shape the cotton ball, so that it fits down a little ways on the front of the microphone's shaft).
To make it look nicer, you can then wrap that with some highly breathable, light frabric and tie it off; then cut off any excess material.
What doing this will achieve is to prevent the gush of wind (due to vocalization) from hitting the microphone's diaphragm, and hence preventing it from bottoming out. Yet the airy batting material (such as cotton batting) will still allow the sound waves to get through just fine.
Experiment around with different configurations to find out what works best on your microphone.
I have that same problem with my mic (popping P's and clicks on occasion).
I've been placing the mic away from my mouth at some distance, but that takes away from the volume and make me sound a bit "faded". I intend to use your cotton ball method and test it with some new recordings.
Great tips -- thank you! I need them!
Boys will be girls.
Author (under a nom de plume) of "Jesus Is an Anarchist", Dec. 4, 2011, http://ssrn.com/abstract=1337761
Theophysics, http://theophysics.freevar.com , http://theophysics.epizy.com
Author (under a nom de plume) of "Jesus Is an Anarchist", Dec. 4, 2011, http://ssrn.com/abstract=1337761
Theophysics, http://theophysics.freevar.com , http://theophysics.epizy.com
-
- Posts: 17
- Joined: Sat Jun 21, 2008 6:26 pm
- Contact:
Thanks, Jamie!
Excellent advice. I will definitely join Ms Samantha in trying the cotton trick.
Hopefully, that will fix the problem!
Excellent advice. I will definitely join Ms Samantha in trying the cotton trick.
Hopefully, that will fix the problem!